Mac How to Make Powerpoint Slide Widescreen
Bones steps
To change the slide size:
-
Select the Blueprint tab of the toolbar ribbon.
-
Select Slide Size
almost the far right end of the toolbar. -
Select Standard (4:iii aspect ratio) or Widescreen (16:9) or Custom Slide Size.
For more about the predefined sizes (including formats like Overhead, A3, A4, Banner, B4, and B5) or your ain custom sizing, click a heading beneath to expand it and see the details.
Detailed steps
-
On the Blueprint tab of the Ribbon, locate Slide Size in the Customize grouping, nearly the far right end of the toolbar.
-
Select Slide Size, and so select either Standard (4:three) or Widescreen (16:ix).
When PowerPoint is unable to automatically calibration your content, it prompts you lot with ii options:
-
Maximize: Select this selection to increment the size of your slide content when you lot are scaling to a larger slide size. Choosing this option could result in your content not fitting on the slide.
-
Ensure Fit: Select this option to decrease the size of your content when scaling to a smaller slide size. This could make your content announced smaller, simply you'll be able to encounter all content on your slide.
-
The xvi:9 widescreen setting is the default value for new presentations you create. When yous change the slide size for a presentation, the size yous cull only applies to that presentation. However, y'all tin brand it easy to create a new 4:3 presentation for yourself whenever y'all want—by defining a custom theme that uses the 4:3 aspect ratio. Come across the section below named "Make a default size to start from when creating new presentations."
-
On the Design tab of the Ribbon, locate Slide Size in the Customize grouping, nigh the far correct end of the toolbar.
-
Select Slide Size, and and then select Custom Slide Size.
-
In the Slide Size box, click the downward arrow side by side to Slides sized for and select an pick. Their dimensions are listed below:
Name
Width
Elevation
On-screen Show (4:three)
10 in / 25.four cm
7.5 in / 19.05 cm
Alphabetic character Paper (8.5x11 in)
10 in / 25.iv cm
vii.5 in / 19.05 cm
Ledger Newspaper (11x17 in)
13.319 in / 33.831 cm
9.99 in / 25.374 cm
A3 Paper (297x420 mm)
14 in / 35.56 cm
10.5 in / 26.67 cm
A4 Paper (210x297 mm)
ten.833 in / 27.517 cm
7.5 in / xix.05 cm
B4 (ISO) Paper (250x353mm)
11.84 in / 30.074 cm
viii.88 in / 22.556 cm
B5 (ISO) Newspaper (176x250mm)
7.84 in / nineteen.914 cm
5.88 in / 14.936 cm
35 mm Slides
11.25 in / 28.575 cm
7.five in / nineteen.05 cm
Overhead
10 in / 25.iv cm
vii.5 in / 19.05 cm
Imprint
viii in / 20.32 cm
1 in / 2.54 cm
On-screen Show (xvi:9)
10 in / 25.iv cm
5.625 in / 14.288 cm
On-screen Show (16:ten)
10 in / 25.4 cm
6.25 in / xv.875 cm
Widescreen
thirteen.333 in / 33.867 cm
7.5 in / xix.05 cm
Overhead provides an attribute ratio very close to the standard four:three slide size.
There are ii options for 16:nine aspect ratios:
-
On-screen Evidence (sixteen:nine) sets the slide dimensions to 10 in 10 5.625 in.
-
Widescreen sets it to thirteen.333 in 10 7.v in.
Both of these options are the same aspect ratio so they will wait the same in Normal View, since PowerPoint automatically adjusts the zoom level. Widescreen (xiii.333 in x seven.5 in.) provides more slide surface area for the content, and then that is the best choice for presentations. Widescreen won't fit on an 8.five" 10 11" sheet of paper without you having to scale it down.
-
-
Select OK to accept the dimensions and shut the Slide Size dialog box.
-
On the Design tab of the Ribbon, locate Slide Size in the Customize group, near the far correct end of the toolbar.
-
Select Slide Size, and so select Custom Slide Size.
The Slide Size dialog box opens.
-
In the Slide Size dialog box, ensure the orientation is gear up the way you want it.
-
In the Peak and Width boxes, PowerPoint accepts measurements in inches, centimeters, or pixels. Blazon a number followed past a space and then the appropriate abbreviation: in, cm, or px.
Width or Height
Minimum:
ane in
ii.54 cm
120 px
Maximum:
56 in
142.24 cm
720 px
PowerPoint and so converts measurements, if necessary, to the blazon of unit your operating arrangement uses.
-
Click OK.
When PowerPoint is unable to automatically scale your content, it prompts you with ii options:
-
Maximize: Select this option to increase the size of your slide content when yous are scaling to a larger slide size. Choosing this pick could consequence in your content not plumbing fixtures on the slide.
-
Ensure Fit: Select this option to subtract the size of your content when scaling to a smaller slide size. This could make your content appear smaller, but you'll be able to run into all content on your slide.
-
You tin modify the unit of measure that is shown in PowerPoint dialog boxes if yous like.
This version of PowerPoint has a default size of xvi:nine for new presentation, simply you lot can create a different default for yourself.
-
Get-go PowerPoint.
-
On the File tab of the toolbar ribbon, select New. And then double-click the Bare Presentation to create a new, empty presentation.
-
Then on the Design tab, click Slide Size and choose the size you want for a default.
(If you want a different default slide size than what's listed there, select Custom Slide Size and so choose your size in the Slide Size dialog box, and then click OK.)
-
On the Pattern tab, click the More arrow in the bottom-right corner of the Themes group:
-
Select Salvage Current Theme.
-
Give your theme a name that you lot'll call back easily and click Save. Don't change the folder that the new theme is to be saved in.
-
On the Design tab, click the More arrow again in the lesser-correct corner of the Themes grouping. Y'all'll run across your newly saved theme under a Custom heading.
-
Right-click that new custom theme under the Custom heading, and and so select Set up equally Default Theme:
-
Close PowerPoint. Don't save any files if it prompts you lot.
-
Open PowerPoint again. On the File tab of the toolbar ribbon, select New.
The custom theme that yous just saved is listed at the top left corner, named Default Theme. The thumbnail image looks like a widescreen slide, only in reality, when you create a new presentation based on that theme, the presentation has the aspect ratio that you've defined for this default theme.
The next time you open PowerPoint, you'll see your default theme in the upper-left of the theme gallery. When yous select it, all the slides will be the custom size you chose by default.
Sizing applies to all slides in a presentation
PowerPoint isn't able to resize ane slide inside a presentation. All slides in a presentation are the aforementioned size.
If this is a feature you'd like to request, please send u.s.a. your feedback to help us prioritize new features in hereafter updates. Meet How do I give feedback on Microsoft Role for more information.
Orientation applies to all slides in a presentation
PowerPoint isn't able to alter the folio orientation of certain slides. All slides in a presentation have the same page orientation.
If this is a characteristic you'd like to asking, delight transport us your feedback to help the states prioritize new features in hereafter updates. See How do I requite feedback on Microsoft Part for more data.
Come across As well
Change the page orientation in PowerPoint between landscape and portrait
Apply portrait and landscape slide orientation in the same presentation
Reduce the file size of a picture
Important: Function 2010 is no longer supported. Upgrade to Microsoft 365 to piece of work anywhere from any device and proceed to receive support.
Upgrade now
To change the slide size:
-
Select the Blueprint tab of the toolbar ribbon.
-
Select Folio Setup
on the left terminate of the toolbar. -
In the Page Setup dialog box, nether Slides sized for, choose the predefined size yous want, or cull Custom and specify the dimensions you want.
For more nigh the predefined sizes (including formats like Overhead, A3, A4, Banner, B4, and B5) or your own custom sizing, click a heading beneath to aggrandize it and see the details.
Basic steps
To change the slide size:
-
Select the Pattern tab of the toolbar ribbon.
-
Select Folio Setup
on the left end of the toolbar. -
In the Page Setup dialog box, under Slides sized for, cull the predefined size you want, or choose Custom and specify the dimensions y'all want.
For more about the predefined sizes (including formats similar Overhead, A3, A4, Banner, B4, and B5) or your own custom sizing, click a heading below to aggrandize it and see the details.
Detailed steps
-
On the Design tab of the Ribbon, select Page Setup.
The Folio Setup dialog box opens.
-
Select the Slides Sized for listing to open it, and then select 1 of the options.
The choices and their measurements are listed beneath:
Proper name
Width
Height
On-screen Prove (4:3)
x in / 25.4 cm
7.v in / 19.05 cm
On-screen Evidence (sixteen:9)
x in / 25.4 cm
v.625 in / 14.288 cm
On-screen Evidence (sixteen:10)
10 in / 25.4 cm
six.25 in / 15.875 cm
Letter Paper (8.5x11 in)
x in / 25.4 cm
7.5 in / 19.05 cm
Ledger Newspaper (11x17 in)
xiii.319 in / 33.831 cm
9.99 in / 25.374 cm
A3 Paper (297x420 mm)
fourteen in / 35.56 cm
ten.five in / 26.67 cm
A4 Paper (210x297 mm)
10.833 in / 27.517 cm
seven.five in / nineteen.05 cm
B4 (ISO) Paper (250x353mm)
11.84 in / 30.074 cm
8.88 in / 22.556 cm
B5 (ISO) Paper (176x250mm)
7.84 in / 19.914 cm
v.88 in / 14.936 cm
35 mm Slides
11.25 in / 28.575 cm
7.v in / nineteen.05 cm
Overhead
x in / 25.4 cm
7.5 in / 19.05 cm
Banner
eight in / 20.32 cm
1 in / two.54 cm
Custom
n/a
northward/a
Overhead provides an aspect ratio very close to the standard 4:3 slide size.
-
Click OK.
When PowerPoint is unable to automatically scale your content, information technology volition prompt you with ii options:
-
Maximize: Select this option to increase the size of your slide content when you are scaling to a larger slide size. Choosing this option could result in your content not fitting on the slide.
-
Ensure Fit: Select this option to subtract the size of your content when scaling to a smaller slide size. This could make your content appear smaller, but you'll be able to see all content on your slide.
-
-
On the Design tab of the Ribbon, select Page Setup.
The Folio Setup dialog box opens.
-
Select the Slides Sized for list to open it, so select Custom at the bottom of the list.
-
In the Height and Width boxes, specify the dimensions you lot want.
The unit of measure for these boxes is determined by your computer'southward operating arrangement. If you demand to catechumen from one system to another, see an online converter such every bit UnitConverters.net.
The minimum and maximum dimensions that PowerPoint accepts are:
Width or Acme
Minimum:
1 in
2.54 cm
120 px
Maximum:
56 in
142.24 cm
720 px
You lot can change the unit of mensurate that is shown in PowerPoint dialog boxes.
Sizing applies to all slides in a presentation
Some folks have asked nigh resizing ane slide within a presentation. PowerPoint isn't able to exercise that. All slides in a presentation are the same size.
Orientation applies to all slides in a presentation
Some folks accept as well asked about changing the page orientation of sure slides. PowerPoint isn't able to do that. All slides in a presentation have the same folio orientation.
See Also
Change the page orientation in PowerPoint betwixt landscape and portrait
Use portrait and landscape slide orientation in the same presentation
Reduce the file size of a picture
Basic steps
To modify the slide size:
-
On the File menu, select Page Setup.
-
In the Page Setup dialog box, under Slides sized for, select the predefined size you desire, or choose Custom and specify the dimensions yous want.
For more about the predefined sizes (including formats like Overhead, A3, A4, Banner, B4, and B5) or your own custom sizing, click a heading below to expand information technology and encounter the details.
Detailed steps
-
On the Pattern tab of the Ribbon, locate Slide Size in the Customize group, near the far right end of the toolbar.
-
Select Slide Size.
-
Select Standard (iv:3) or Widescreen (16:9).
PowerPoint may prompt you lot about scaling your content. Choose one of the following options:
-
Scale: Select this option to decrease or increase the size of your slide content. When scaling to a smaller slide size, this could make your content announced smaller, but you'll be able to come across all content on your slide.
-
Don't Scale: Select this choice to maintain the size of your slide content. Choosing this selection could result in your content non plumbing fixtures on the slide.
-
On the Design tab of the Ribbon, locate Slide Size in the Customize group, near the far right terminate of the toolbar.
-
Select Slide Size.
-
Choose Folio Setup from the menu that appears.
Page Setup gives you an assortment of predefined slide/folio size options. The options and their dimensions are listed below:
Name
Width
Height
On-screen Show (four:three)
x in / 25.four cm
7.5 in / 19.05 cm
Letter Paper (8.5x11 in)
x in / 25.four cm
vii.5 in / xix.05 cm
Ledger Paper (11x17 in)
xiii.319 in / 33.831 cm
nine.99 in / 25.374 cm
A3 Paper (297x420 mm)
xiv in / 35.56 cm
10.5 in / 26.67 cm
A4 Paper (210x297 mm)
ten.833 in / 27.517 cm
7.five in / xix.05 cm
B4 (ISO) Paper (250x353mm)
eleven.84 in / 30.074 cm
eight.88 in / 22.556 cm
B5 (ISO) Paper (176x250mm)
7.84 in / nineteen.914 cm
v.88 in / 14.936 cm
35 mm Slides
11.25 in / 28.575 cm
7.5 in / 19.05 cm
Overhead
10 in / 25.four cm
7.5 in / 19.05 cm
Banner
8 in / twenty.32 cm
i in / 2.54 cm
On-screen Prove (16:9)
10 in / 25.4 cm
5.625 in / 14.288 cm
On-screen Show (xvi:10)
x in / 25.four cm
half dozen.25 in / 15.875 cm
Widescreen
13.333 in / 33.867 cm
seven.v in / 19.05 cm
-
In the Slide Size box, click the down arrow next to Slides sized for and select an option.
Overhead provides an aspect ratio very close to the standard iv:3 slide size.
There are 2 options for 16:9 attribute ratios:
-
On-screen Bear witness (xvi:9) sets the slide dimensions to 10 in 10 5.625 in.
-
Widescreen sets the dimensions to 13.333 in ten 7.v in.
Both of these options are the same aspect ratio so they will look the same in Normal View, since PowerPoint automatically adjusts the zoom level. Widescreen (13.333 in x 7.5 in.) provides more slide surface expanse for the content, then that is the all-time choice for presentations. Widescreen won't fit on an 8.5" x 11" sheet of paper without y'all having to scale it downward.
-
-
Select OK to have the dimensions and close the Slide Size dialog box.
-
On the Design tab of the Ribbon, locate Slide Size in the Customize group, near the far right end of the toolbar.
-
Select Slide Size, and so click Page Setup.
The Page Setup dialog box opens.
-
In the Width and Height boxes, PowerPoint accepts measurements in inches, centimeters, or pixels. Type a number followed by a space then the advisable abbreviation: in (inches) or cm (centimeters) or px (pixels).
PowerPoint and so converts the measurements, if necessary, to the unit of measurement of measurement your operating system uses.
Width or Peak
Minimum:
i in
2.54 cm
120 px
Maximum:
56 in
142.24 cm
720 px
-
Click OK.
PowerPoint may prompt you lot almost scaling your content. Choose one of the following options:
-
Calibration: Select this option to subtract or increment the size of your slide content. When scaling to a smaller slide size, this could make your content announced smaller, but you'll be able to meet all content on your slide.
-
Don't Calibration: Select this option to maintain the size of your slide content. Choosing this pick could effect in your content non fitting on the slide.
-
-
On the Blueprint tab of the Ribbon, locate Slide Size in the Customize grouping, nigh the far right stop of the toolbar.
-
Select Slide Size, and then select Page Setup.
-
Follow the steps in the prior department to choose the slide size you want.
-
On the Pattern tab, click the More than arrow below the standard themes.
-
Click Salve Current Theme at the bottom of the window.
-
Give your theme a name that you lot'll recall hands and click Salvage.
-
On the Design tab, click the More pointer beneath the standard themes again. Yous'll come across your newly saved theme nether Custom.
-
Right-click your new custom theme, and so click Set every bit Default Theme.
The next fourth dimension you open up PowerPoint, y'all'll run across your default theme in the upper-left of the theme gallery. When you select information technology, all the slides will be the size you lot chose for your default theme.
Sizing applies to all slides in a presentation
Some folks have asked nigh resizing one slide within a presentation. PowerPoint isn't able to do that. All slides in a presentation are the same size.
Orientation applies to all slides in a presentation
Some folks take as well asked about changing the page orientation of certain slides. PowerPoint isn't able to practise that. All slides in a presentation have the aforementioned page orientation.
Come across Also
Change the page orientation in PowerPoint between mural and portrait
Basic steps
To change the slide size:
-
Select the Design tab of the toolbar ribbon.
-
Select Slide Size
near the far right end of the toolbar. -
Select Standard (four:3 aspect ratio) or Widescreen (xvi:9) or Custom Slide Size.
For more about the predefined sizes (including formats like Overhead, A3, A4, Imprint, B4, and B5) or your ain custom sizing, click a heading beneath to expand information technology and encounter the details.
Detailed steps
-
On the Design tab of the toolbar ribbon, click Slide Size in the Customize group.
-
Click Standard (four:3) or Widescreen (xvi:9).
When PowerPoint for the web is unable to automatically scale your content, it prompts you with two options:
-
Maximize: Select this option to increment the size of your slide content when you are scaling to a larger slide size. Choosing this choice could result in your content not fitting on the slide.
-
Ensure Fit: Select this pick to subtract the size of your content when scaling to a smaller slide size. This could make your content appear smaller, merely you'll exist able to come across all content on your slide.
-
The 16:9 widescreen setting is the default value for new presentations you lot create. When you alter the slide size for a presentation, the size y'all choose just applies to that presentation.
You can also modify the orientation of all the slides in your presentation. See Alter the page orientation for instructions.
-
On the Blueprint tab of the Ribbon, locate Slide Size in the Customize group, near the far right stop of the toolbar.
-
Select Slide Size, and so select Custom Slide Size.
-
In the Slide Size box, click the down arrow adjacent to Slides sized for and select an option. Their dimensions are listed beneath:
Name
Width
Pinnacle
On-screen Bear witness (4:iii)
10 in / 25.4 cm
7.5 in / 19.05 cm
Letter Paper (8.5x11 in)
ten in / 25.4 cm
7.five in / 19.05 cm
Ledger Newspaper (11x17 in)
13.319 in / 33.831 cm
9.99 in / 25.374 cm
A3 Paper (297x420 mm)
xiv in / 35.56 cm
10.five in / 26.67 cm
A4 Newspaper (210x297 mm)
x.833 in / 27.517 cm
vii.v in / 19.05 cm
B4 (ISO) Paper (250x353mm)
11.84 in / xxx.074 cm
viii.88 in / 22.556 cm
B5 (ISO) Paper (176x250mm)
seven.84 in / xix.914 cm
5.88 in / xiv.936 cm
35 mm Slides
eleven.25 in / 28.575 cm
7.5 in / nineteen.05 cm
Overhead
10 in / 25.iv cm
vii.five in / 19.05 cm
Banner
8 in / 20.32 cm
1 in / 2.54 cm
On-screen Show (16:ix)
10 in / 25.iv cm
five.625 in / fourteen.288 cm
On-screen Show (sixteen:x)
10 in / 25.4 cm
6.25 in / 15.875 cm
Widescreen
13.333 in / 33.867 cm
vii.five in / nineteen.05 cm
Overhead provides an attribute ratio very close to the standard four:3 slide size.
There are two options for sixteen:nine aspect ratios:
-
On-screen Evidence (16:nine) sets the slide dimensions to x in x 5.625 in.
-
Widescreen sets information technology to 13.333 in x vii.5 in.
Both of these options are the same aspect ratio so they will await the same in Normal View, since PowerPoint automatically adjusts the zoom level. Widescreen (13.333 in ten 7.5 in.) provides more slide surface expanse for the content, then that is the best selection for presentations. Widescreen won't fit on an viii.v" x xi" sheet of paper without yous having to scale it downwardly.
-
-
Select OK to take the dimensions and close the Slide Size dialog box.
-
On the Design tab of the Ribbon, locate Slide Size in the Customize grouping, near the far correct stop of the toolbar.
-
Select Slide Size, then select Custom Slide Size.
The Slide Size dialog box opens.
-
In the Width and Height boxes, blazon a measurement in inches. PowerPoint doesn't accept measurements outside the minimum and maximum shown beneath:
Width or Height
Minimum:
1 inch
(One inch is equal to 2.54 cm.)
Maximum:
56 inches
(L-half-dozen inches is equal to 142.24 cm.)
-
Click OK.
When PowerPoint for the spider web is unable to automatically scale your content, it prompts you lot with two options:
-
Maximize: Select this choice to increase the size of your slide content when you are scaling to a larger slide size. Choosing this option could result in your content non fitting on the slide.
-
Ensure Fit: Select this option to decrease the size of your content when scaling to a smaller slide size. This could make your content appear smaller, but yous'll exist able to meet all content on your slide.
-
Meet As well
Change the page orientation in PowerPoint between mural and portrait
DOWNLOAD HERE
Mac How to Make Powerpoint Slide Widescreen TUTORIAL
Posted by: haroldexcen1949.blogspot.com
Comments
Post a Comment